TMCnet News
Could Frame Loss Jeopardize the Surveillance Market?Addressing Inherent Frame Loss Issues for Solid State Drives in Modern Surveillance Applications with RECLine™ Firmware Optimization TAIPEI, Taiwan, March 29, 2018 /PRNewswire/ -- Innodisk, a leading provider of storage, memory and expansion cards for the embedded and industrial market, is using an innovative method to counter frame loss for surveillance systems using flash storage. The solid state drive (SSD) is increasingly finding its rightful place in the surveillance world. New surveillance features such as facial recognition, data analytics, and smart city solutions, all require large data amounts to be handled on-the-spot. As an example, picture a busy intersection that does not just run on timed signals, but rather changes dynamically according to traffic. Cameras follow the ebb and flow of vehicles and people while simultaneously calculating the most efficient flow of traffic. While this requires a lot of computational power, even incremental improvements will lead to significant cost savings for socity. Modern surveillance features such as this are what gives the better performing SSD a leg up on the legacy hard disk drive (HDD). Innodisk was approached by one of its partners that had run into some issues with SSDs used in surveillance equipment. The equipment recorded high-resolution video where consistent quality was vital to the application. However, when testing this new setup, the recordings would all exhibit re-occurring frame loss; leaving the equipment manufacturer at a loss as to the reason behind it. The crux of the problem lay in the execution of background processes (garbage collection and wear leveling), which handle the deletion of SSD data. These processes usually kick in when the SSD workload is lighter, as to minimize the impact on performance. This obviously introduces some problems to surveillance recording, which is constantly running, as any background process will cause a drop in video quality when it starts up. Innodisk's investigation into this issue led to the development of RECLine™. RECLine alters the firmware of the SSD; dispersing and lowering the frequency of background processes. This allows the SSD to continuously write data with minimal interference and frame loss. RECLine, and the associated InnoREC™ Surveillance SSD series, remove the last stumbling block for the SSD in the surveillance market and help pave the road towards the promised features of smart cities and IoT. For more information about Innodisk and the newest surveillance solutions, visit https://www.innodisk.com/en/applications/surveillance. For Media Inquiries: 
|