CHANNELS

Subscribe to the InfoTech eNewsletter

infoTECH News

TMCNet:  Intergraph(R) Webinar June 26th to Demonstrate Using Screening Tools in CAESAR II(R) to Check In-Line Loads in Piping

[June 17, 2014]

Intergraph(R) Webinar June 26th to Demonstrate Using Screening Tools in CAESAR II(R) to Check In-Line Loads in Piping

(Marketwire Via Acquire Media NewsEdge) HOUSTON, TX -- (Marketwired) -- 06/17/14 -- Intergraph will host a webinar on June 26, 2014 at 10:00 a.m. CT that will demonstrate screening tools in CAESAR II that allow you to quickly check piping loads in line during the static analysis of the system, along with the basic system layout, for evaluation in the output processor. CAESAR II has long had stand-alone processors to check pipe connections using engineering standards for pumps, compressors, and heat exchangers. Because piping system safety and reliability can require more than these code stress evaluations to maintain equipment loads within their limits during operation, over the last few years CAESAR II has added these new screening capabilities that allow you to check loads in line during the static analysis, a quick way to monitor the general health of the system. This webinar will review the flange equivalent pressure check and the nozzle limit check, two of these screening tools in CAESAR II. The webinar leader will be David Diehl, manager of training for Intergraph CADWorx® & Analysis Solutions and lead instructor for CAESAR II.

For more information about the webinar, visit http://coade.typepad.com/coadeinsider/2014/05/intergraph-caesar-ii-webinar-screening-tools-in-caesar-ii.html. For a link to register, visit http://icas.intergraph.com/screeningtoolscii.

For information on Intergraph analysis products visit http://www.intergraph.com/ppm/analysis.aspx. For more information on Intergraph CADWorx, visit http://www.intergraph.com/products/ppm/cadworx/.

About Intergraph CADWorx & Analysis SolutionsThe Intergraph CADWorx & Analysis Solutions (CAS) products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. They include CADWorx Plant Design Suite for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro for intelligent 2D design and layout; CAESAR II, the world's most widely used pipe stress analysis software; PV Elite for vessel and exchanger design and analysis; and TANK for the design and analysis of oil storage tanks. For information on Intergraph CAS, visit www.coade.com.

Intergraph, the Intergraph logo, CADWorx, CAESAR II and PV Elite are registered trademarks, and TANK is a trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2014 Intergraph Corp. All rights reserved.

Contacts Gary Carson +1.713.668.8550 Email Contact Vornel Walker +1.281.890.4566 Source: Intergraph

[ InfoTech Spotlight's Homepage ]


blog comments powered by Disqus

FOLLOW US

Subscribe to InfoTECH Spotlight eNews

InfoTECH Spotlight eNews delivers the latest news impacting technology in the IT industry each week. Sign up to receive FREE breaking news today!
FREE eNewsletter